Memory Mods?

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Fragum

Member
Joined
Nov 23, 2007
Messages
22
Location
NW Arkansas
This has probably been posted already...

Are there any PM's in the memory modules (see image)
 

Attachments

  • memmod.jpg
    memmod.jpg
    26.2 KB · Views: 508
Fragum,

The jury is still out for conclusive yield data on the black chips, but rumor has it that an average is from zero to 1 gram per pound in general for plactic pack ics. This figure may be a combination of PMs, not exclusively one PM in particular. I haven't performed any yield tests of my own.

I can tell you that the monolithic capacitors on the memory sticks do contain PGMs (mostly palladium) especially those manufactured prior to 1992.

Steve
 
HI,
today i was cutting some finger off memory sticks, I have some small ones about 2.5 to 3 inches long and it looks as if the green board has gold looking stuff all through it. Does it?

keith
 
Here's a link to an old post on the subject of gold traces:

http://goldrefiningforum.com/phpBB3/viewtopic.php?p=1796#1796

Read through the whole post you'll find a lot of good stuff in that one.

Steve
 
Back
Top