Makayu_glass
New member
- Joined
- Apr 2, 2013
- Messages
- 3
Pcb from Telecom Equipment
- Thread starter Makayu_glass
- Start date
Help Support Gold Refining Forum:
kernels
Well-known member
I have processed some similar boards from mobile phone towers, the yield was much poorer than expected due to all that visible gold being ENIG - very thin plating. Some of those boards have white ceramic components with gold plated heatsinks, those components are quite good yield.
anachronism
Well-known member
- Joined
- May 31, 2016
- Messages
- 3,124
Hi Kernels
Yes it's thin however the board is extremely light so overall the yield per tonne is surprisingly high. Also if you look closely at that board it's had all the "packages" harvested already from the holes that are interestingly "package shaped" 8)
To the OP no I don't think anyone will be able to tell you what yield you can expect from these. The range of types is enormous.
Jon
Yes it's thin however the board is extremely light so overall the yield per tonne is surprisingly high. Also if you look closely at that board it's had all the "packages" harvested already from the holes that are interestingly "package shaped" 8)
To the OP no I don't think anyone will be able to tell you what yield you can expect from these. The range of types is enormous.
Jon
