Different Boards - Any experience or thoughts

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

snoman701

Well-known member
Joined
Oct 8, 2016
Messages
2,108
Location
SE MI
First, these are PCB trimmings, but I'm confused by the edge. It's almost like it's been plated, but as I said, this is scrap material.IMG_3562.JPG
 
These have the best LOOKING connectors I've ever seen. But it could just be an optical illusion.

Backplane and the matching modules.

IMG_3573.JPGIMG_3571.JPG
 
Vintage HP...not sure what this is out of, haven't looked, don't really care. But, I like the surface area!! This board is about 6" x 12", and both sides are plated.

IMG_3572.JPG
 
Finally, hughes anubis sat transmitter parts. Really thin boards, but only dual layer :cry:

I had to pay good money for these, but it should work out because of their thickness.

IMG_3574.JPG
 
Back
Top