What u think abouth that bord.

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

spoke27

Well-known member
Joined
Aug 22, 2008
Messages
119
Location
Turkey
Hi
Any ine see that type bord before. There have gold but..
 

Attachments

  • 20191110_003132.jpg
    20191110_003132.jpg
    3 MB · Views: 233
  • 20191110_003144.jpg
    20191110_003144.jpg
    2.2 MB · Views: 233
  • 20191110_155445.jpg
    20191110_155445.jpg
    2.7 MB · Views: 233
It's from enterprise Telecoms. Either Nortel or Ericsson. The base is a copper board with gold plating.

A lot of copper to dissolve in order to reclaim your gold.
 
There is very little gold or value in that circuit board.

Your health is much more valuable.

Do not try to recover or refine, or use any acids on metals or circuit boards unless you have a very good understanding of the dangers involved and know how to avoid them, and you have a safe environment to work in.

Without understanding the safety, you are not only losing your gold because you do not know what you are doing, but you will also be putting yourself and anyone around you in serious danger.
 
Dear butcher..

I only disolve that bord maybe 5 gr and for only check palddium test.. And I dont put they my house.. you can be sure yes that bord dont have much gold.. I was try to Iodine process.. for not disolve all copper..
Ty your attention
 
Back
Top