7daycourier
New member
- Joined
- Aug 17, 2017
- Messages
- 2
I was wondering if this is an alright idea. I have these connectors with a pretty thick layer of gold. don't know what there off of. I can't free the pins from the plastic very easily. So I was thinking of cleaning as much plastic off as possible. Then drop them in an acid peroxide bath and letting the acid dissolve the Pins. Is this to much copper? I know the best way would be to reverse electro plate them. But I don't have any mill to free it from the plastic. Or even a seperator. Any ideas would be appreciated.