kevin316 said:Can I use Stainless in my AP as my bubble line or will it cause issues with copper cementing out of solution. I think I know the answer, just need a second opinion.
kernels said:I drilled a few holes in my inner bucket and just weaved the tube through. Tied off the end of the tube and poked some small holes in the tube with a hot needle.
kevin316 said:Thanks guys, I did know the answer. I thought if I used stainless I could make a nice coil and not have to worry about it floating. What do you use to hold the tubing in place? I used a small piece of brass on my test batch (small amount of pins with lots of solder mixed in) and the acid ended up eating it.
I don't think you got the point although you arrived on the correct answer.kevin316 said:Actually the stainless is cheaper. I can get my hands on as much tubing as I want. But aquarium tubing will be the way I go.
goldscraphobby said:I zip tied a rock to the end of the tube to keep it from floating
Enter your email address to join: