• If you have bought, sold or gained information from our Classifieds, please donate to Gold Refining Forum and give back.

    You can become a Supporting Member or just click here to donate.

US Robotics ISA modems

shop deals on amazon
Advertise with us
Shop deals on ebay
xelexo
Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
glorycloud

glorycloud

Well-known member
Joined
Dec 5, 2008
Messages
1,905
Location
Georgia
I am still a buyer for up to (100) USR ISA modems like these:
USR 0460.jpg
USR 0584 56K ISA.jpg

When you are scrapping old PC's - look for these modems inside of them.
Let me know if you find some. Just don't snap off the gold fingers!
Leave them intact please!!!
 
How did you come across them? Are they pulls from working systems
or is their condition unknown?

Working modems of this sort are $10 each or I can trade some
CPU's, pins or gold bearing stuff for them.
 
it's been a long time since i had them...from what i can remember i was saving them hoping that in the future i will be able to use them but not for gold recovery...i used to take computer classes at a local community college. that explains why i have these. good thing i haven't cut off the gold fingers.
 
glorycloud said:
I am still a buyer for up to (100) USR ISA modems like these:
View attachment 1


When you are scrapping old PC's - look for these modems inside of them.
Let me know if you find some. Just don't snap off the gold fingers!
Leave them intact please!!!
Click to expand...

GloryCloud what do you pay for them, if you don't mind me asking.

jeneje
 
glorycloud said:
I am OK for them right now as I bought (200+). 8)

I normally pay $8 - $10 for the 0460 or 0584's.
Click to expand...
Hey glorycloud, I will start to keep my for you I have two right now but i get them all the time if this will help you out.

Thank for the reply
Kenneth
 
glorycloud said:
Just remember two things, they need to be 0460 or 0584's
AND be jumperable for COM and IRQ on the cards.
Click to expand...



And I presume since you're being so specific that they need to be working boards?
 
That would be correct. They do need to have the gold fingers intact though boys and girls. 8)

I am not actively needed any at the moment.
 
I am a buyer again for up to (100) USR ISA modems like these:

USR 0460 ISA.jpg
USR 0584 56K ISA.jpg

They must have the jumpers on them. If you don't know
what a jumper is PM me. 8)

If you have some that still have their fingers on them,
please PM me.
 

Latest posts

Back
Top