sakosakarian
Member
- Joined
- Jul 10, 2013
- Messages
- 17
hey guyz
how can i get back gold from plating gold and precipate it. plz any body can help me
how can i get back gold from plating gold and precipate it. plz any body can help me
gold plating
- Thread starter sakosakarian
- Start date
Help Support Gold Refining Forum:
solar_plasma
Well-known member
Download Hoke and read it.
Read safety section and guided tour on this forum.
Search for AP or sulfuric cell (depending on what kind of gold plated scrap you have).
Many succesful beginners start with AP. Sulfuric cell is much more dangerous.
Read safety section and guided tour on this forum.
Search for AP or sulfuric cell (depending on what kind of gold plated scrap you have).
Many succesful beginners start with AP. Sulfuric cell is much more dangerous.
sakosakarian
Member
- Joined
- Jul 10, 2013
- Messages
- 17
i read all cm hokes after 2 weeks but i didn't fount anything about plating gold and he contain 24-k gold and the plating water contain cyanour, nitric, and b sulfate how can i get my gold back
NobleMetalWorks
Well-known member
Are you trying to get gold out of a gold plating solution? Or gold plated items?
If it is a gold plating solution, can you give the composition?
Scott
If it is a gold plating solution, can you give the composition?
Scott
- Joined
- Feb 25, 2007
- Messages
- 8,360
Depends on the nature of the plating solution. Some can be difficult, if not impossible, to extract. However, in most cases, powdered zinc should make a full recovery. You may also achieve your goal by simply plating all of the values from the solution, using an inert anode.
Harold
Harold
sakosakarian
Member
- Joined
- Jul 10, 2013
- Messages
- 17
from cyan-our ,nitric and b sulfate
sakosakarian
Member
- Joined
- Jul 10, 2013
- Messages
- 17
NobleMetalWorks said:
it is a gold plating solution that contains cyanour, nitric acid and bisulphate and 24 kt gold. how can i get the gold out?
