pins, contacts in connectors and fingers

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

loco

Well-known member
Joined
Oct 2, 2007
Messages
168
Location
Michigan - south western mich.
Whats the best way to process these? I just picked up parts from an old phone pbx that is probably from the 70's and there appears to be some decent potential. I know lasersteve and GSP gave guides but I am not sure which covers all of these or if there is a suggested method that will easily process all of these types of e-scrap. Any help would be greatly appreciated. Thank you.
 
In honesty you need to keep different types of scrap separated when processing , fingers are relatively easy to recover using AP whereas pins will probably be better suited to the sulphuric cell and the connectors will need a few tests to find the best process depending on there make up.
 
Back
Top