DIY Automatic PCB Depopulator Machine (100-200kg per hour) under 500usd

Harshrao

Member
Joined
Feb 29, 2020
Messages
9
VIDEO LINK
Made this PCB depopulator machine under 500usd
Capacity - 100-200kg per hour
So, Basically we made this machine to process 500-700kg of low grade boards daily
First, we put the PCB'S into the machine and turn on the heating system after a few minutes solder starts to melt and gets collected at the bottom of the machine in a metal tray
and the components are collected into an another metal tray which is placed in front of the machine as shown in the video and the depopulated boards are collected into another tray.
Exhaust system is install right above the machine to collect and eliminate the fumes (fumes can be stopped from generating by a small modification)
(This machine is based on a universal design used by all Ewaste processing plants around the world)

English isn't my first language, so please excuse ay mistakes.









Screenshot_20211016-014630_WhatsApp.jpgScreenshot_20211016-014424_Gallery.jpg-
Screenshot_20211016-014404_Gallery.jpgScreenshot_20211016-014537_WhatsApp.jpg


 

Marcel

Well-known member
Joined
Feb 18, 2012
Messages
459
Location
Europe/Germany
That is the kind of solution you can find from China as I pointed out in a similar thread. Automatic PCB depopulation machine
Critical issue here are the fumes. You absolutely should avoid to breath in these fumes and have a good fume extractor. For the sake of your health and your family. Try to lead them away, maybe a water scrubber solution could neutralize them in a cost-effective way. But don't take these fumes easy. They are really toxic! Take care.
 
Top