General gold

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Samigoli

New member
Joined
Dec 14, 2021
Messages
2
Location
London
Hi..we have some nokia board .and we want extract them..now my question is how much gold is there to get,,?
I'll show you their photos.
I hope eny one help me.
Weight of each board about 600g
 

Attachments

  • IMG_۲۰۲۲۰۵۰۶_۱۹۴۴۲۷.jpg
    IMG_۲۰۲۲۰۵۰۶_۱۹۴۴۲۷.jpg
    1.9 MB · Views: 15
  • IMG_۲۰۲۲۰۵۰۶_۱۹۴۴۳۲.jpg
    IMG_۲۰۲۲۰۵۰۶_۱۹۴۴۳۲.jpg
    1.7 MB · Views: 15
Simple, not very much.
How many boards?
Did you buy them in Israels and plan to process them in UK?

There may be way less than you hope.
Without knowing for sure way less then a gram for these two.
If anyone have more specific info please correct me.
 
I’m far from an expert on e scrap but there’s probably as much if not more value in the chips as on the visible plating this making it a far from easy recovery.
 
A general rule of thumb is 3 ounces per ton and that varies based on the age of the boards, older boards containing more gold. While 3 ounces per ton may sound low, bear in mind that ore mined from the earth rarely exceeded 1 ounce per ton and today it runs as fractional ounces per ton. And e-scrap has the benefit of high copper content, which defines the process to recover it.
 
Back
Top