Palladium recovery from catalytic converter.. Worth it?

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hard to say, depending on how high you really get the temperature.
It is higher than copper needs, but just barely.
And then there are the other factors, the ceramics need even higher, maybe even with cryolite.
Only thing to do is wait for the experts to chime in or give it a try.
 
Hard to say, depending on how high you really get the temperature.
It is higher than copper needs, but just barely.
And then there are the other factors, the ceramics need even higher, maybe even with cryolite.
Only thing to do is wait for the experts to chime in or give it a try.
My table top furnace only hits 2200F I'm going to try lead outside next My buyer shot the slag with the xrf and there were still pgms in it... Saving it of course!
 
Back
Top