Pyrolisys/incinerator

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rickzeien

Well-known member
Joined
Nov 14, 2017
Messages
544
I decided to put this here, even though I started we with s purchased unit it will go through some modification to make it fit to our purpose. (If the moderators think it would be better in the other section please move it)

https://drive.google.com/file/d/1BghRS2tlN72zila_oxiIYKnVLnGalBCI/view?usp=drivesdk

Sent from my SM-G950U using Tapatalk

 
Made a quick profile of the lower combustion chamber.

The lower arc is the profile of a pan.

The circle represents the path that the mixer paddle will travel.

0e3bc615d37c977bfbfb7124af2a342b.jpg


Sent from my SM-G950U using Tapatalk

 
patnor1011 said:
Looks great. Don't forget to post a video of that beast when going full steam. :mrgreen:
Thanks! I sure will.

Sent from my SM-G950U using Tapatalk

 
Here is the inconel tube I purchased. When I originally priced this 14 inch diameter by 72 it was almost 8K. Almost gave up on the project.

Found a company that produces spin cas tubing. I hot it for 2400 with shipping.

Oh it's on!

f4e4d5ff877e031ff9ee119bb21e3a7f.jpg
67a7a6ac4ada7b32e7653dbdb52f0f55.jpg


Sent from my SM-G950U using Tapatalk

 
Back
Top