• If you have bought, sold or gained information from our Classifieds, please donate to Gold Refining Forum and give back.

    You can become a Supporting Member or just click here to donate.

For Sale Ready to process lot

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bawaayce

Member
Joined
Feb 1, 2015
Messages
11
Hi fellow refiners,

I've been on this forum for over six years and I have learned so much. I collected for years and read this forum daily before I felt like I was ready to begin recovery. I started small and learned my lesions. I did have a close call recovering black sludge from a de-plating cell but was spared by the safety advice on this form. TY TY TY! I recovered 41 grams of Gold and then ended up divorcing and moving out of my home and gold recovery lab. I am now going through my gold recovery stock as I will be moving across the county in Aug. Not sure If I will be picking it up again so I am posting my depopulated stock here:

Lot is ~120 lbs of mostly ready to process electronic scrap. I depopulated this material from high quality 90's equipment with the expectation that I would be refining it. So there is no fill and everything is sorted like you would do for yourself. The memory fingers are trimmed right up to the gold, etc. I know what the expected outcome is for this material cuz I have been processing it. I am willing to sell this lot for 70% of expected outcome which would put your profit at 30% minus materials - $200-250 (Assuming you are making your own nitric).

Requirements:
  • Needs to be sold in one lot
  • Buyer pays shipping or travel expenses (I am southern WI, USA)
    • If you are coming on site, I have lots of fully populated telecom boards and lab glass if interested.
  • Cash
  • If sold here, I will donate 3% of the sale to this site in show my appreciation.

So you know I'm not a pozer, Here are some pics of my results:

9.886.png41.097.png

Here is what I have (Sorry for the misaligned pics):

ITEM LBS unless stated otherwise

Memory Fingers 90's (Memory in this lot) 1.518

fingers.jpg

PCB Fingers (Old) 0.298

Old-Fingers.jpg

Memory sticks newer (mostly trimmed)     6.012

Memory-6012.jpg

Memory sticks older (80's 90's)            2.463

Memory-2463.jpg

Memory sticks newer            5.181

memory-5181.jpg

Memory sticks mixed (trimmed)           6.124

memory-6124.jpg

Memory sticks (90's)                    3.907

memory-3.907.jpg

Memory sticks (90's)                    4.601

Memory-4.601.jpg

Memory chips (80's - 90's)            7.313

Memory-7313.jpg

Memory Chips (80's - 90's) 5.955

Memory-5955.jpg

Memory Chips (80's - 90's) 5.309


Memory-5309.jpg

Memory Mixed 5.452


Memory-Mix-5452.jpg

4x Flat - ThinMix1 6.007


4xFlat-ThinMix1.jpg

4x Flat - ThinMix2 6.664

4xFlat-ThinMix2.jpg

4x Flat - ThinMix3 6.056

4xFlat-ThinMix3.jpg

4x Flat - ThinMix 6.082

4xFlat-ThinMix4.jpg

4x Flat Large Thick 2.520

4XFlat-Large.jpg

4x Flat Thick 4.894

4xFlat-4.894.jpg

BGA Small 4.350

BGA-Small.jpg

BGA 5.399

BGA.jpg

Examples of BGA included

BGA-Example.jpg

Ceramic DIP Large 6.250

CeramicDIP-Large.jpg

Ceramic DIP 3.613

CeramicDIP.jpg

DIP Large 3.589

DIP-Large.jpg

DIP 4.788

DIP.jpg

Fiber CPU 0.809

FiberCPU.jpg

Ceramic CPU 6.347

CeramicCPU.jpg

Ceramic CPU Sockets 1.997

CPUSockets.jpg

Pins 1.076

GoldPins.jpg

Silver Connectors 2.105

SilverConnectors.jpg

MLCC (Non-Magnetic) 474 Grams

MLCC.jpg

Old Caps 108 Grams

OldCaps.jpg
 

Attachments

  • memory-6124.jpg
    memory-6124.jpg
    101.6 KB · Views: 0
Hi fellow refiners,

I've been on this forum for over six years and I have learned so much. I collected for years and read this forum daily before I felt like I was ready to begin recovery. I started small and learned my lesions. I did have a close call recovering black sludge from a de-plating cell but was spared by the safety advice on this form. TY TY TY! I recovered 41 grams of Gold and then ended up divorcing and moving out of my home and gold recovery lab. I am now going through my gold recovery stock as I will be moving across the county in Aug. Not sure If I will be picking it up again so I am posting my depopulated stock here:

Lot is ~120 lbs of mostly ready to process electronic scrap. I depopulated this material from high quality 90's equipment with the expectation that I would be refining it. So there is no fill and everything is sorted like you would do for yourself. The memory fingers are trimmed right up to the gold, etc. I know what the expected outcome is for this material cuz I have been processing it. I am willing to sell this lot for 70% of expected outcome which would put your profit at 30% minus materials - $200-250 (Assuming you are making your own nitric).

Requirements:
  • Needs to be sold in one lot
  • Buyer pays shipping or travel expenses (I am southern WI, USA)
    • If you are coming on site, I have lots of fully populated telecom boards and lab glass if interested.
  • Cash
  • If sold here, I will donate 3% of the sale to this site in show my appreciation.

So you know I'm not a pozer, Here are some pics of my results:

View attachment 57375View attachment 57376

Here is what I have (Sorry for the misaligned pics):

ITEM LBS unless stated otherwise

Memory Fingers 90's (Memory in this lot) 1.518

View attachment 57379

PCB Fingers (Old) 0.298

View attachment 57390

Memory sticks newer (mostly trimmed)     6.012

View attachment 57377

Memory sticks older (80's 90's)            2.463

View attachment 57378

Memory sticks newer            5.181

View attachment 57380

Memory sticks mixed (trimmed)           6.124

View attachment 57382

Memory sticks (90's)                    3.907

View attachment 57383

Memory sticks (90's)                    4.601

View attachment 57384

Memory chips (80's - 90's)            7.313

View attachment 57385

Memory Chips (80's - 90's) 5.955

View attachment 57386

Memory Chips (80's - 90's) 5.309


View attachment 57387

Memory Mixed 5.452


View attachment 57388

4x Flat - ThinMix1 6.007


View attachment 57389

4x Flat - ThinMix2 6.664

View attachment 57392

4x Flat - ThinMix3 6.056

View attachment 57393

4x Flat - ThinMix 6.082

View attachment 57394

4x Flat Large Thick 2.520

View attachment 57395

4x Flat Thick 4.894

View attachment 57396

BGA Small 4.350

View attachment 57397

BGA 5.399

View attachment 57398

Examples of BGA included

View attachment 57409

Ceramic DIP Large 6.250

View attachment 57399

Ceramic DIP 3.613

View attachment 57400

DIP Large 3.589

View attachment 57401

DIP 4.788

View attachment 57402

Fiber CPU 0.809

View attachment 57404

Ceramic CPU 6.347

View attachment 57403

Ceramic CPU Sockets 1.997

View attachment 57405

Pins 1.076

View attachment 57406

Silver Connectors 2.105

View attachment 57407

MLCC (Non-Magnetic) 474 Grams

View attachment 57408

Old Caps 108 Grams

View attachment 57391

Hi,
Where are you located?
 
Hi fellow refiners,

I've been on this forum for over six years and I have learned so much. I collected for years and read this forum daily before I felt like I was ready to begin recovery. I started small and learned my lesions. I did have a close call recovering black sludge from a de-plating cell but was spared by the safety advice on this form. TY TY TY! I recovered 41 grams of Gold and then ended up divorcing and moving out of my home and gold recovery lab. I am now going through my gold recovery stock as I will be moving across the county in Aug. Not sure If I will be picking it up again so I am posting my depopulated stock here:

Lot is ~120 lbs of mostly ready to process electronic scrap. I depopulated this material from high quality 90's equipment with the expectation that I would be refining it. So there is no fill and everything is sorted like you would do for yourself. The memory fingers are trimmed right up to the gold, etc. I know what the expected outcome is for this material cuz I have been processing it. I am willing to sell this lot for 70% of expected outcome which would put your profit at 30% minus materials - $200-250 (Assuming you are making your own nitric).

Requirements:
  • Needs to be sold in one lot
  • Buyer pays shipping or travel expenses (I am southern WI, USA)
    • If you are coming on site, I have lots of fully populated telecom boards and lab glass if interested.
  • Cash
  • If sold here, I will donate 3% of the sale to this site in show my appreciation.

So you know I'm not a pozer, Here are some pics of my results:

View attachment 57375View attachment 57376

Here is what I have (Sorry for the misaligned pics):

ITEM LBS unless stated otherwise

Memory Fingers 90's (Memory in this lot) 1.518

View attachment 57379

PCB Fingers (Old) 0.298

View attachment 57390

Memory sticks newer (mostly trimmed)     6.012

View attachment 57377

Memory sticks older (80's 90's)            2.463

View attachment 57378

Memory sticks newer            5.181

View attachment 57380

Memory sticks mixed (trimmed)           6.124

View attachment 57382

Memory sticks (90's)                    3.907

View attachment 57383

Memory sticks (90's)                    4.601

View attachment 57384

Memory chips (80's - 90's)            7.313

View attachment 57385

Memory Chips (80's - 90's) 5.955

View attachment 57386

Memory Chips (80's - 90's) 5.309


View attachment 57387

Memory Mixed 5.452


View attachment 57388

4x Flat - ThinMix1 6.007


View attachment 57389

4x Flat - ThinMix2 6.664

View attachment 57392

4x Flat - ThinMix3 6.056

View attachment 57393

4x Flat - ThinMix 6.082

View attachment 57394

4x Flat Large Thick 2.520

View attachment 57395

4x Flat Thick 4.894

View attachment 57396

BGA Small 4.350

View attachment 57397

BGA 5.399

View attachment 57398

Examples of BGA included

View attachment 57409

Ceramic DIP Large 6.250

View attachment 57399

Ceramic DIP 3.613

View attachment 57400

DIP Large 3.589

View attachment 57401

DIP 4.788

View attachment 57402

Fiber CPU 0.809

View attachment 57404

Ceramic CPU 6.347

View attachment 57403

Ceramic CPU Sockets 1.997

View attachment 57405

Pins 1.076

View attachment 57406

Silver Connectors 2.105

View attachment 57407

MLCC (Non-Magnetic) 474 Grams

View attachment 57408

Old Caps 108 Grams

View attachment 57391
 

Attachments

  • 8D44AB1D-DFE2-4612-BF5A-DB57EFEE3325.jpeg
    8D44AB1D-DFE2-4612-BF5A-DB57EFEE3325.jpeg
    2.4 MB · Views: 0
Offer has been redacted.
I can see no change.
Any way we do not support editing past posts since it breaks the meaning many threads.
At least we consider it a breach of forum rules if you edit a post with no notice that it has been edited.
 
I can see no change.
Any way we do not support editing past posts since it breaks the meaning many threads.
At least we consider it a breach of forum rules if you edit a post with no notice that it has been edited.
The offer of the sale of this lot as described in this thread has been redacted.
 
So you mean it has been withdrawn, not redacted?

as per definition:
View attachment 57481
I was writing a snarky response before I noticed English is not your primary language. I forget that this form has regional diversity, and if I had a do-over, I probably would use "This lot is no longer available for sale" vs. my original use of Redacted.
 
I was writing a snarky response before I noticed English is not your primary language. I forget that this form has regional diversity, and if I had a do-over, I probably would use "This lot is no longer available for sale" vs. my original use of Redacted.
In my, and I like to think, most others worlds it is a form of edit, regarding text.
I have been wrong before though.
And can also mean hidden obfuscated and such, and that was the part I was confused by.
If you had said "retracted" I would have gotten it ;):ROFLMAO::eek:
I hope you got a good price or a good home for it.

Edited for clarity
 
Back
Top