catalytic converters

[arthur kierski]

i got a way to extact pt, pd and rh from ctalyst converters.
first: i reduce the ceramics to about 70% from its original
weight.second:extract pd and pt and sometimes rh with ar plus sulfuric acid.
the ceramic after this operation is reduced to more 16% of its original weight---them i extract if any left--rhodium from this ceramics.usually thereis no rhodium left.
the rhodium from the convertes is used by me to make rhodium plating baths.
i would like feed backs from you ---thanks

 

[Froggy]

Hi, thx for posting,,, check out the thread on the platinum section, under "Platinumill exposed and on trial", thats where most of us cat guys are hanging out.. Frog

 

[markqf1]

What process are you using?

Mark

 

[Anonymous]

hey all
im new here and i have a question how much can you get from an avg converter

 

[markqf1]

Dude, you got alot of research to do.
I'm not even sure there is a such a thing as an average converter.
Start reading from the top.

Mark

 

[Smitty]

Marks right. There are too many factors when assaying the amount of pgm's in a cat. There are cats with 1 and two combs, then there are import and domestics, and size of the cat. Year in production of the cat is also a factor. There are a lot of info on cats, just keep searching the threads.