S solarnevo1 Active member Joined Jan 27, 2012 Messages 42 Apr 20, 2020 #1 Hi any advice for pd+ag relay points? These are cuted with some base material. Base material looks like brass.
Hi any advice for pd+ag relay points? These are cuted with some base material. Base material looks like brass.
F fishaholic5 Well-known member Supporting Member Joined Jun 5, 2018 Messages 198 Location Australia Apr 20, 2020 #2 Dissolve in Nitric, precipitate Silver as Silver Chloride using Salt or HCl. Filter then cement Palladium using Copper or Precipitate using DMG Cheers Wal
Dissolve in Nitric, precipitate Silver as Silver Chloride using Salt or HCl. Filter then cement Palladium using Copper or Precipitate using DMG Cheers Wal
S solarnevo1 Active member Joined Jan 27, 2012 Messages 42 Apr 21, 2020 #3 Thank's same way I had in mind. Salt mixed in water?
S solarnevo1 Active member Joined Jan 27, 2012 Messages 42 Apr 21, 2020 #4 Wich way is better? Hcl or salt?
F fishaholic5 Well-known member Supporting Member Joined Jun 5, 2018 Messages 198 Location Australia Apr 21, 2020 #5 Dissolving the Salt first adds more to the solution volume but doesn't hurt. There's a little more stirring if its not dissolved. HCl is better if you have a lot of Silver in Solution. Cheers Wal
Dissolving the Salt first adds more to the solution volume but doesn't hurt. There's a little more stirring if its not dissolved. HCl is better if you have a lot of Silver in Solution. Cheers Wal