oro-del-sur
Active member
I need to setup an alkaline drip for a 1 t/hr solids feed to a small CIP plant.
What is the most practical method to do this considering the low solubility of hydrated lime (calcium hydroxide)?
I was wanting to use a 55 gal plastic drum but realize 400-500 grams will reach saturation, not nearly enough concentration to achieve 10-11 pH in the Pachuca tanks using a slow drip feed.
The chemicals will feed into a trommel that washes / screens tailings - a continuous operation, designed to run 24/7.
Thank you in advance!
What is the most practical method to do this considering the low solubility of hydrated lime (calcium hydroxide)?
I was wanting to use a 55 gal plastic drum but realize 400-500 grams will reach saturation, not nearly enough concentration to achieve 10-11 pH in the Pachuca tanks using a slow drip feed.
The chemicals will feed into a trommel that washes / screens tailings - a continuous operation, designed to run 24/7.
Thank you in advance!