High Pressure Low Volume Pump

[Anonymous]

Pump motor is 110 volt AC, will do 350 bar (5000 psi) Anyone interested.

Best Regards
Gustavus

 

[lazersteve]

Can you post a photo and model information?

Steve

 

[Anonymous]

Tried to do a picture, camera will not cooperate. I read the bar pressure wrong it should have read 350 bar ( 5000 ) psi.

The electric motor is manufactured by

Leroy Somer, single phase 110/120 - Amps 3.2 volt

220/210 volt. Amps 1.6 d

Duty rating S1, Protection IP55

Motor has a gear reduction attached which drives the piston pump. the pump is adjustable via a micrometer dial numbered 0 - 9, the base numbering is 100 to 0.

Specs from the Manufactures plate, Dosapro Milton Roy,

Instrument Minipump

Delivery 480 ml / hour
Pressure 350 Bar
Date of Manufacture 24/01/80

http://i235.photobucket.com/albums/ee193/gustavus1_photos/dcp03910.jpg
http://i235.photobucket.com/albums/ee193/gustavus1_photos/dcp03909.jpg
http://i235.photobucket.com/albums/ee193/gustavus1_photos/dcp03907.jpg
http://i235.photobucket.com/albums/ee193/gustavus1_photos/dcp03908.jpg

Shipping weight 19.5 lbs asking $150.00 shipping inclusive anywhere in the USA - Canada may cost more.

ttys
Gustavus

 

[Lou]

Do you know anything on delivery/flowthrough in L/Hr?

I am very interested (this could be good for supercritical fluids work).


Lou

 

[istari9]

Is the rated voltage on Europes specs? I see it was made in France. Will it power down to 110volts @ 60Hz and run in America? Will it need a voltage regulator for this country? Makes a difference the way it is built..
I looked a second time and answered my own questions! Looks very nice.
Well built....
Ray