Lots of Processors and parts

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
A

Anonymous

Guest
Hi,

I am new to the forum and I recently came by a load of computer parts for free and was considering selling the processors on eBay. Any advice on whether this would be a good avenue to pursue would be greatly appreciated. I was also curious if I could sell motherboards? are they worth anything? I am going to harvest the fingers of the cards I got and I might use AP to get gold from those. Everything else is going to the scrap yard. I got about 10 lbs of aluminum heat sinks and a big bag of wires, hopefully they will give me some money for those?


I obtained:

26 Ceramic Pentium's
18 Fiber Pentiums
31 Pentium II's (21 ceramic, 11 Fiber)
2 Pentium Gold top's
6 Celeron's (Fiber)
3 P3's (Fiber)
1 Intel Overdrive DX20D
15 AMD K-6
1 AMD K-5
1 AMD Duron
1 IBM 6x86 PR 166
1 Cyrix 486

Total = 106

I would post pictures but they take forever to load as they are 5mb.
 
Welcome to the forum,

If you just want to sell them out right, let me know via PM.

Steve
 
Anyone know where to sell motherboards. I have 30 and need to know if they are worth the trouble of keeping?
 
Hey there,
We sell boards in bulk to an outfit that has a small refinery complete with ball mill and leach tanks. The price for boards made in the last 10 years usually range in the 2-3.50/lb area. That's for pallet loads at a time of course.
Hope that helps.
 
Harvester3 said:
Hey there,
We sell boards in bulk to an outfit that has a small refinery complete with ball mill and leach tanks. The price for boards made in the last 10 years usually range in the 2-3.50/lb area. That's for pallet loads at a time of course.
Hope that helps.

Can you clarify this? Do you mean $2.00 to $3.50 per pound?
 

Latest posts

Back
Top