rusty
Well-known member
- Joined
- Sep 15, 2010
- Messages
- 1,782
This winters project, a wet belt to recover high grade values along with the lower grade copper.
Picked up an old treadmill with a 1.5 HP permanent magnet DC motor, control the speed with an SCR then I'll exchange the treadmill belting for a smooth one.
Not shown in the picture is the spray bar positioned midway.
Picked up an old treadmill with a 1.5 HP permanent magnet DC motor, control the speed with an SCR then I'll exchange the treadmill belting for a smooth one.
Not shown in the picture is the spray bar positioned midway.