The melt-master returns for an encore!

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

glorycloud

Well-known member
Joined
Dec 5, 2008
Messages
1,907
Location
Georgia
Any pirates out there want this "beautiful" earring that I just made
(by mistake of course). 8)
pirates earring.JPG
pirate closeup.JPG

Shiver me timbers matey!!!!!!! Aaaaaaarrrrggghhhhh!!!!
 
What are you guys using for a torch? An ounce can easily be done with just a mapp gas torch. If you guys want me to make a video of this I will.
 
goldenchild said:
What are you guys using for a torch? An ounce can easily be done with just a mapp gas torch. If you guys want me to make a video of this I will.

It's not you guy's it is only Glory....He will get the hang of it.
 
Barren Realms 007 said:
goldenchild said:
What are you guys using for a torch? An ounce can easily be done with just a mapp gas torch. If you guys want me to make a video of this I will.

It's not you guy's it is only Glory....He will get the hang of it.

I meant for the people having trouble with the melt. :p
 
I think he is the only one having trouble with melting right now.


Is your tourch putting out a flame like this?
[youtube]http://www.youtube.com/watch?v=tWkxtwIebLw[/youtube]
 
It was going well but I was trying to get the molten gold into a,
shall we say, more spherical and asthetically pleasing shape. 8)

What I thought was a nice cooling pipe ended up being the hole
in my pirate earring. Geez!! It's still gold, isn't it!

I will keep practicing - I promise. 8)
 
glorycloud said:
It was going well but I was trying to get the molten gold into a,
shall we say, more spherical and asthetically pleasing shape. 8)

What I thought was a nice cooling pipe ended up being the hole
in my pirate earring. Geez!! It's still gold, isn't it!

I will keep practicing - I promise. 8)

The fact that the pipe was actually a hollow means you still have not gotten the gold completely molten. Once the gold is completely molten it will pool in the bottom of the dish, move freely about if the dish is tilted, and the edges of the button will pull away from the borax coating in the dish. My melting videos show this process and you can clearly see the behavior of the molten gold in all of it's stages of melting.

If your gas cylinder is running low on gas the flame will not get as hot as it would with a good full tank either. The radiated light coming from the furnace opening should be nearly white (not yellow, red, or orange).

I'm sending you a care package to help you out.

Steve
 
Thanks for the care package Steve - I received it today.
Perhaps I have had another A-hah moment? I have had your
mini furnace resting on a computer case cover that's sitting
on two fire bricks. (I didn't want to burn my table top.)
Maybe that's why my furnace never seems to get hot enough as
I am wicking away all the heat. :shock:

When I saw the insulating wool in the box cut to go under the furnace,
it was like DUH!!!!!!

The first furnace that you provided in the soft material always seemed
to work great - right until I messed it up while attemping a pour. 8)

I can't wait to try out the new revision of your mini furnace.

Thanks again!!!!!! Maybe I will finally get a spherical button
that isn't in an earring or an amoebae shape. :lol:
 
Is this you glorycloud? :p

http://cgi.ebay.com/24-KARAT-REFINED-GOLD-NUGGET-13-8-GRAMS-SCRAP-WEAR-24K-/190427362569?pt=LH_DefaultDomain_0
 

Latest posts

Back
Top