24 k Gold finish christmas ornaments

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

flyfisherman

Well-known member
Joined
Dec 5, 2011
Messages
89
Hi folks,i been a member of this forum for a while, but not posted any coments.I have a question about those 24 k gold finish christmas ornaments.Has anyone done this type of material before?I bought a few of those in local second-hand store.I wounder what would be a best way to process them.I was going to mix them with my gold filled lot and process with nitric,but maybe there is an easier way.What do you guys think?Thanks for any help.
 
Hcl/Bleach would work well on glass or ceramic ,but how about gold on brass?These ornaments are 24 k gold finish brass.
 
Any thing decorative that won't experience wear is super thin. All they need is enough gold to make it look like gold and, unless they're idiots, they're not going to put on any extra. I would figure about 5 to 10 cents per square inch.
 
I broke few of them to see how thick the gold film is and it does not look super thin to me.Off course i could be mistaken.I mean they are thin ,but not that much thiner than 1/20 gold filled foils.But maybe its just optical illusion.
 
I have a few of these, I think they are from Hallmark? I planned on trying them in the sulphuric cell next time I process any plated material.

Jim
 
They are from different companies.Some of mine are pictures of buildings,some White House selebratory ornaments,ect.Few got enamel film on the surface.Sulfuric cell would be probably chiper than nitric bath.
 
Hello there,
Can somebody tell me what is the 24 k Gold finish Christmas ornament?
Thanks in advance
 
I processed quite a few of these. I bought sheets of these as rejects. And yes they are really thinly plated.
I used a sulfuric cell, that was the easiest way, fastest and cheapest too.
 

Latest posts

Back
Top