rickzeien
Well-known member
- Joined
- Nov 14, 2017
- Messages
- 544
Getting ready to build a cell for a pilot project.
I purchased at an auction a copper plating tank that was being used in an art school to plate small objects.
I have a power supply that will run the production thum cells.
For the cathode plates what grade and thickness of stainless steel. (The cathode plates will be approximately 18 x 18 exposed to the electrolyte)
My initial thought is there will be 4 cathode plates.
I want to use titanium baskets with poly bags for the anode. (I plan to make silver shot to use in this cell as well as the thum cell.
https://photos.app.goo.gl/aBQ62GrgrGfXns6Y7
The pumps and filter plus about 200 pounds of copper anode plus 20 pounds of copper abroad nubs came with it.
Sent from my LG-H872 using Tapatalk
I purchased at an auction a copper plating tank that was being used in an art school to plate small objects.
I have a power supply that will run the production thum cells.
For the cathode plates what grade and thickness of stainless steel. (The cathode plates will be approximately 18 x 18 exposed to the electrolyte)
My initial thought is there will be 4 cathode plates.
I want to use titanium baskets with poly bags for the anode. (I plan to make silver shot to use in this cell as well as the thum cell.
https://photos.app.goo.gl/aBQ62GrgrGfXns6Y7
The pumps and filter plus about 200 pounds of copper anode plus 20 pounds of copper abroad nubs came with it.
Sent from my LG-H872 using Tapatalk