A Nice Score...

Shop deals on ebay
Advertise with us
xelexo
shop deals on amazon
Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
evL

evL

Member
Joined
Feb 25, 2012
Messages
21
Location
The Last Best Place...
Hello Folks,

So I have this buddy that dabbles in commercial and government radio gear.
In knowing my latest en-devours he called up and mentioned that he had
something that I might be interested in. I thought I would share it with you
folks. What he gave me is below. They came out of some old government
radio gear. Weighing in at a total of 2.07 lbs. They're great!
 

Attachments

  • 005.jpg
    005.jpg
    1.2 MB
  • 004.jpg
    004.jpg
    1.2 MB
  • 003.jpg
    003.jpg
    1.1 MB
  • 002.jpg
    002.jpg
    1.2 MB
  • 001.jpg
    001.jpg
    1 MB
Hello Folks,

Does anyone have an idea about the best way to process these boards? I also
have memory cards with more than just gold fingers, the traces are gold as well.
AP ? I have Steve's CD on the fingers and wonder if after a good cleaning of parts
would the same method work well on "whole boards"? And should one just toss all
the flat chips? I know stupid questions again. But I looked and looked, perhaps
not hard enough, for the answer. So hence I ask...

Thanks

[][][]
 
look for Patnor1011 http://goldrefiningforum.com/phpBB3/viewtopic.php?f=52&t=11827

depopulate the boards (remove all the components) from any board that has gold traces other than fingers and process them as whole boards.
 
Hello Folks,

Thanks Geo! That is what I thought. Funny, I just came in from depopulating these board in the shop to
check mail and found your post. Ok great! Like I say I also have memory cards with full gold traces so I
will treat them as such as well. Also this "black flat pack" thing has had me curious. Thanks as well for
the link...

[][][]
 

Latest posts

Back
Top