• If you have bought, sold or gained information from our Classifieds, please donate to Gold Refining Forum and give back.

    You can become a Supporting Member or just click here to donate.

tantalum capacitors

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

etack

Well-known member
Joined
Nov 8, 2008
Messages
1,404
Location
Dayton, Ohio
http://recycletantalumcapacitors.com/

more pictures @ http://recycletantalumcapacitors.blogspot.com/

[email protected]

I buy tantalum capacitors.


$20.00Lb Wet electrolyte axial
$15.00LB solid electrolyte axial
$15.00LB polycoated axial,SMD,through hole
$5.00LB foil style or arrays
$50.00LB for prepared anodes
$75.00LB silver wet caps (no leads)



I included so examples of tantalum capacitors I would like more pics of the can type so if you got them post them please.

Any questions relating to Ta capacitors in general please post. Any deals please keep to PM’s but please review your
dealings with me.


I also toll refine silver contacts and solder or jewelry. I can return cemented silver melted into bars or minted silver one TOz rounds. I prefer not to buy them outright but that is not out of the question.

I do other refining from e scrap and karat scrap on a toll refining basses.

PM or email me if you have question.

Eric Tackett




Added pic
 

Attachments

  • Ta cap new 012.JPG
    Ta cap new 012.JPG
    1.6 MB
  • Ta cap new 042.JPG
    Ta cap new 042.JPG
    1.5 MB
Hey,

GSP stated in a post he believed the red plugged ones were running 40% ag.

-Andrew
 

Attachments

  • IMG_20121016_002236.jpg
    IMG_20121016_002236.jpg
    844.7 KB
http://goldrefiningforum.com/phpBB3/viewtopic.php?f=39&t=2919&hilit=Tantalum+silver&start=20

This is a good thread on it.

I will buy the silver too but what I want is about the Ta. I don't want people to think I'm trying to get their silver but the reality is the majority of Ta capacitors are not silver. I have never come across one yet although I'm always looking :lol:

Thanks for the pics now people can separate them out and just sell me the pellet. :lol:

Eric
 
a good way to tell whether a canister type is electrolytic capacitor or tantalum is to use a pair of cutters and try to cut it in half. an electrolytic capacitor will crush flat and a tantalum capacitor will barely make a dent. i have found some tantalum canister types that were as large as the big electrolytic capacitors. ill try to find a photo of one.
 
A list for components with listed elements would be good. Competition out there is fierce for that gold.

Did a search on this one:
Tantalum itself is not magnetic (does not generate the magnetic field); however, it is a paramagnetic material...meaning it will react to a magnetic field.
 

Attachments

  • (4)P1000802.JPG
    (4)P1000802.JPG
    148.6 KB
  • (3)P1000800.JPG
    (3)P1000800.JPG
    111 KB
  • (2)P1000797.JPG
    (2)P1000797.JPG
    425.6 KB
  • (1)P1000796.JPG
    (1)P1000796.JPG
    426 KB
none of what is in your pic is tantalum the only part that is magnetic is the part that is welded to the nickel leed. If there is a nickel leed. The pic is an example of what I'm looking for. they are also cylinders, and they can't be melted with a torch.

A list of what is in other parts and components is a good idea but I would prefer that this thread be solely tantalum caps.

This to not confuse people as to what it is that I'm buying. If you want to ask if it is a Ta cap then post away. 8)

Thanks for your interest
Eric
 

Attachments

  • 019.JPG
    019.JPG
    1.5 MB
Not trying to confuse just trying to identify and finding the best places to look for them.
Looking in the wrong box of many boxes.

Did fine some help with the visual ID, I think.

http://www.alliedelec.com/search/searchresults.aspx?dsNav=Ny:False,Ro:340,N:106-4294887054-4294959754

92 pages worth.

Applications:
Telecommunications (e.g. mobile phones, infrastructure)
Data processing (e.g. laptops, mainframes)
Measuring and control engineering (e.g. voltage regulators)
Automotive electronics (e.g. navigation systems, electronic control units)
Medical engineering
DC/DC converters
 
Etack,

I have some and would be willing to sell, trying to get together as much as I can to make it worth while. Just wanted to post some photos, in the one photo of the silver case caps I have a mixture of other components I thought had silver in them. If your interested lets talk.

Rob
 

Attachments

  • IMG_1451[1].JPG
    IMG_1451[1].JPG
    86.6 KB
  • IMG_1452[1].JPG
    IMG_1452[1].JPG
    127.2 KB
  • IMG_1453[1].JPG
    IMG_1453[1].JPG
    133.8 KB
  • IMG_1454[1].JPG
    IMG_1454[1].JPG
    103.5 KB
Eric,

On the IBM Board Collection link you talked about the in line resistor being ceramic. I have taken some of those off and yes some are ceramic. But the ones I have taken off in the photos below look like tantalum, can you identify? Have you seen them before. The blue caps I posted above are monolithic. I have some componets that I need to Identify.

Rob
 

Attachments

  • IMG_1470[1].JPG
    IMG_1470[1].JPG
    125.3 KB
  • IMG_1468[1].JPG
    IMG_1468[1].JPG
    61.5 KB
  • IMG_1471[1].JPG
    IMG_1471[1].JPG
    68 KB
  • IMG_1472[1].JPG
    IMG_1472[1].JPG
    70.4 KB
The pics that you posted I can't be sure if they a Ta Caps. The best way to test is to burn with a torch and see. The Ta in the caps will turn yellow-orange hot and not melt most of the time they have Ta wire sticking out but not always.

the blue ones that you refer to as "monolithic" I would burn too I think that they are being named "differently" on Ebay.

Look at this link for some color codes about halfway down is the Ta cap codes. http://pcbheaven.com/wikipages/Reading_Part_Values/

Eric
 
nivrnb,
In your photo's
The first one I am not sure of could be capacitors or resistors, usually markings on the circuit board can be clues like R5 (for resistor number five), or C33 (capacitor number 33).

The second picture looks like power resistor usually wire wound.

Third and forth picture are bridge rectifiers (four diodes in one package) for changing alternating current to direct current.
 
butcher said:
nivrnb,
In your photo's
The first one I am not sure of could be capacitors or resistors, usually markings on the circuit board can be clues like R5 (for resistor number five), or C33 (capacitor number 33).

The second picture looks like power resistor usually wire wound.

Third and forth picture are bridge rectifiers (four diodes in one package) for changing alternating current to direct current.


Ummm no, or I don't think so anyway. I also thought at first that those devices labeled 5615732 looked like bridge rectifiers, but the pin labels are wrong for that. A bridge rectifier has two AC inputs normally marked with sine wave symbols, and two outputs labeled + and -. This device has two + pins and two - pins. It may be some special purpose device with two diodes in the same package? Or for all I know it could be some sort of dual capacitor? If we knew the manufacturer there might be a chance of looking it up online but the number itself doesn't lead to anything.

macfixer01
 
Thanks everyone, the small black object, came from and IBM 360 board. No other identification on it. Butcher thanks for identifiying the power resistor. The top photo I did not look at the board when I took it off.

Rob
 
if you have a meter you may be able to tell what the black cubes contain, A diode will pass current one direction and not the other it is like a check valve in plumbing.
 
Butcher,

I tested the components like you suggested with my diode checker and I got a .0 and .0 when I reversed the polarity. The search continues and wanted to post some photos of the tantalum caps taken apart. While I was taking these apart I noticed that they have a black substance covering the metal. While placing them in a glass container, I noticed that this black powder kept forming, for this being metal it sure acts like carbon. So I took a piece to some sand paper and I could finally see the metal.

I am thinking that the smaller ones must surely be a small piece of metal under the coating.


Rob
 

Attachments

  • IMG_1473[1].JPG
    IMG_1473[1].JPG
    514.5 KB
  • IMG_1474[1].JPG
    IMG_1474[1].JPG
    348.2 KB
  • IMG_1476[1].JPG
    IMG_1476[1].JPG
    473.3 KB
Hey nivrnb great pics this is a great article on Ta caps short and to the point.

http://technology-electronic.blogspot.com/2010/06/tantalum-electrolytic-capacitors.html.

The black powder looks to be MnO2 and Tantalum pentoxide. If you heat it with a torch it turns to Ta metal.

The blue caps that you thought to be monolithic caps appear when torched to be that. They have no wire extending out of the middle and are a different color. They are black with silver bands on the ends and when heated they don't oxidize. I don't know if they contain other PMs thoe I don't see why they would not.

Thanks for your interest and info.

Eric
 
Just thought I would look around and post a little on capacitors

http://en.wikipedia.org/wiki/Silver_mica_capacitor

Does this look familiar?
http://dumbledore.hubpages.com/hub/Palladium-An-overlooked-E-scrap-Recycler-Resource

http://www.kemet.com/kemet/web/homepage/kfbk3.nsf/vaFeedbackFAQ/814E07593EC6218985256BCD004EBC1A/$file/jn97tctp.pdf

Notice part number:
http://www.digikey.com/Web%20Export/Supplier%20Content/JohansonDielectrics_709/PDF/JDI_Training_MLCC-Basics.pdf?redirected=1

http://old.iihr.uiowa.edu/~hml/people/kruger/Publications/ChipCenter/CeramicCapConst.pdf

The older silver cases tantalum capacitor:
http://www.mallory-sonalert.com/capacitor/2_3.htm

http://www.mallory-sonalert.com/capacitor/2_3.htm


Tantalum:
http://en.wikipedia.org/wiki/Tantalum_capacitor

Gold cap capacitors (I would call them carbon caps):
http://www.panasonic.com/industrial/components/pdf/goldcap_tech-guide_052505.pdf

Ceramic:
http://en.wikipedia.org/wiki/Ceramic_capacitor
http://www.vishay.com/docs/23108/561r.pdf
 

Latest posts

Back
Top