220V 1kg - 3kg Gold Melting Furnace Smelt Metal Platinum Palladium Silver

[mineshaft]

The melting point of Gold, Silver, copper and other metal below 1400℃ can be melted by graphite crucible.

Melting point over 1400℃ should be melted by quartz crucible. (quartz crucible is heating by metal induction)

The melting point of metal powder over 1400℃ is not suggested to use this melting furnace.

Melting the metal powder by quartz crucible, the amount of metal powder must be up to 70%.


Specification:

Max Melting Capacity

1KG (Gold/Platinum)

2KG (Gold/Platinum)

Voltage

220V; 50/60Hz; Single phase

Power

5000W

Meltable metals

platinum, palladium, stainless steel, gold, silver, copper and other alloys

Melting time

2-3 minutes

2-5 minutes

Max temperature

2100℃

Cooling system

water cooling (circulating water, pump water)

Dimension

620*360*380mm

Weight

32kg

Stainless steel jet self-priming water pump Param eters:

Voltage: 220V/50Hz

Power: 0.37KW

Current: 2.4A

Rotation speed: 2900r/min

Pipe diameter: 25mm

Rated flow rate: 1.5m³/h

Max flow rate: 3.0m³/h

Rated lift: 20m

Max lift: 30m

Max suction lift: 8.5m

Weight: 6kg

Size: 360*160*190mm

$1000 shipped

 

[Yggdrasil]

The melting point of Gold, Silver, copper and other metal below 1400℃ can be melted by graphite crucible.

Melting point over 1400℃ should be melted by quartz crucible. (quartz crucible is heating by metal induction)

The melting point of metal powder over 1400℃ is not suggested to use this melting furnace.

Melting the metal powder by quartz crucible, the amount of metal powder must be up to 70%.


Specification:

Max Melting Capacity

1KG (Gold/Platinum)

2KG (Gold/Platinum)

Voltage

220V; 50/60Hz; Single phase

Power

5000W

Meltable metals

platinum, palladium, stainless steel, gold, silver, copper and other alloys

Melting time

2-3 minutes

2-5 minutes

Max temperature

2100℃

Cooling system

water cooling (circulating water, pump water)

Dimension

620*360*380mm

Weight

32kg

Stainless steel jet self-priming water pump Param eters:

Voltage: 220V/50Hz

Power: 0.37KW

Current: 2.4A

Rotation speed: 2900r/min

Pipe diameter: 25mm

Rated flow rate: 1.5m³/h

Max flow rate: 3.0m³/h

Rated lift: 20m

Max lift: 30m

Max suction lift: 8.5m

Weight: 6kg

Size: 360*160*190mm

$1000 shippedView attachment 66501

I think you need to add some more information.
Is this a single unit and new or used?
Where in the world is it?

 

[4metals]

@mineshaft your profile says Salem Oregon but your IP address is Nigeria. This doesn't look good, please explain.

 

[Martijn]

kind of looks like this picture, if aliexpress sells it for 2500 dollar, a 1000 dollar offer (from the most trustworthy african country) will not be new, or a very likely a scam.
The wooden table in the OP's post looks like a poor photoshop job.


we'll see what his reaction is. if any.

 

[adam mizer]

The OP's picture I see it on ebay. HERE
Same picture.
Lowest pricing I see is roughly $2,100 dollars.

 

[Yggdrasil]

The OP's picture I see it on ebay. HERE
Same picture.
Lowest pricing I see is roughly $2,100 dollars.

We will give him some time to respond.
If nothing happen, it will be the hammer.