Aquarium bubbler for my AP

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ellias

Well-known member
Joined
Jul 6, 2024
Messages
68
Location
VA
H3llo folks! I just installed an aquarium air pump onto my AP solution. But my solution looks very dark brown/black. Does it still work, do i revive it somehow - any advice?
 

Attachments

  • 20241014_165313.jpg
    20241014_165313.jpg
    1.5 MB
H3llo folks! I just installed an aquarium air pump onto my AP solution. But my solution looks very dark brown/black. Does it still work, do i revive it somehow - any advice?
If it does not clear up and turn green with the air in a couple of days, add a bit HCl to convert the copper 1 chloride in copper 2 chloride.
Be sure to place the air pump above the jar to prevent a siphon effect if the pump fails.
 
If it does not clear up and turn green with the air in a couple of days, add a bit HCl to convert the copper 1 chloride in copper 2 chloride.
Be sure to place the air pump above the jar to prevent a siphon effect if the pump fails.
This is actually the color after a week (I added bubbler today though) happen to know what this color is? I thought it was iron chloride at first, bit im not sure since there is a light yellow/green to it if i look at it with just a drop on a white spoon.
 
This is actually the color after a week (I added bubbler today though) happen to know what this color is? I thought it was iron chloride at first, bit im not sure since there is a light yellow/green to it if i look at it with just a drop on a white spoon.
After a few days with bubbler it should become green again.
Or add a splash of HCl.
 
This is actually the color after a week (I added bubbler today though) happen to know what this color is? I thought it was iron chloride at first, bit im not sure since there is a light yellow/green to it if i look at it with just a drop on a white spoon.
The color is the buildup of Cu+1 ions. Adding the bubbler oxidizes the Cu+1 to Cu+2. The Cu+2 will then dissolve more copper, creating Cu+1 again, and that cycle repeats itself.

Dave
 
This is actually the color after a week (I added bubbler today though) happen to know what this color is? I thought it was iron chloride at first, bit im not sure since there is a light yellow/green to it if i look at it with just a drop on a white spoon.
 

Attachments

  • Screenshot_20201012-223446_Drive.jpg
    Screenshot_20201012-223446_Drive.jpg
    208.4 KB

Latest posts

Back
Top