• Please join our new sister site dedicated to discussion of gold, silver, platinum, copper and palladium bar, coin, jewelry collecting/investing/storing/selling/buying. It would be greatly appreciated if you joined and help add a few new topics for new people to engage in.

    Bullion.Forum

Furnace

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

seawolf

Well-known member
Joined
Oct 18, 2010
Messages
285
Would a small furnace that recirculates the fumes to the firebox work for ashing boards?furnace.JPG
 
Hi – What you have there is a pyrolysis reactor, and yes feed the off gas from the reactor back into the furnace, thus supplying extra fuel for the system. Where your pipe enters the furnace, put a burner/blower.

Pyro.jpg

Here is the type of system I have used in the past. Remember you will not ash your produce but just removing the volatile organics. I have just posted my incinerator for dealing with just this type of pyrolysed boards.

Enjoy

Deano
 
I figured on using wood or charcoal for the fuel and maybe finding a way to put the smoke thwough a water spray to catch some of the fines if any.
Mark
 
Forgot to mention that you will need to keep the off gas feed from the reactor in the furnace it's self or you will have problems with condencing and general blocking of the pipe.

By using the off gas in this way you will be able to monitor when the pyrolysis is near completion, at this point, keep the heat on for another 10-15min.

Cheers

Deano
 
Back
Top