• Please join our new sister site dedicated to discussion of gold, silver, platinum, copper and palladium bar, coin, jewelry collecting/investing/storing/selling/buying. It would be greatly appreciated if you joined and help add a few new topics for new people to engage in.

    Bullion.Forum

Gas Bubbler Threaded Connections

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

kadriver

Well-known member
Supporting Member
Joined
Oct 25, 2010
Messages
1,831
Location
United States
Hello,

I have a nice big gas bubbler/dryer that I just bought.

It has threaded connections for the inlet and the outlet.

I improvised for a connection by heating a piece of clear plastic tubing to get it pliable, then quickly forcing it over the thread for a gas-tight connection (see photo).

I would like to get the correct threaded fittings for this piece, but I can not seem to find them.

If anyone could help me identify the proper fittings for this it would be greatly appreciated.

kadriver
 

Attachments

  • P1240123.JPG
    P1240123.JPG
    698.6 KB
  • P1240126.JPG
    P1240126.JPG
    1.2 MB
  • P1240129.JPG
    P1240129.JPG
    477.2 KB
  • P1240131.JPG
    P1240131.JPG
    380 KB
  • P1240132.JPG
    P1240132.JPG
    513.6 KB
I can't be 100% certain but if GL-14 refers to 14mm these fitting may be what you are looking for, if they are standardized. I haven't found dimensioned drawings for diameter or pitch to confirm the fit.

http://www.wilmad-labglass.com/ProductList.aspx?t=576
 
I found the drawing for GL fittings I was looking for. It's on this page.

http://www.bola.de/en/technical-information/screw-joints/determination-of-thread-types.html
 

Latest posts

Back
Top