Gold fingers yield

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

kjavanb123

Well-known member
Joined
Apr 1, 2009
Messages
1,746
Location
USA
All,

I processed 160g of gold fingers removed from misc telecomm boards, using cyanide leaching and recovered 0.4g of purfied gold powder. Here are some photos,

Starting materials,
image.jpg

Materials after leaching completed within few seconds,
image.jpg

Here is the gold powder precipitated from cyanide leaching, gold recovered from fingers usually very fine form,
image.jpg

Refine gold powder,
image.jpg

Once again I would like to thank the forum members specially GoldSilverPro and Jaun whose their posts have been helping me learn about cyanide leach.

Regards
Kj
 
Hi Kevin looks like progress.

How did you make up your leech solution Kevin because you haven't got all the gold off those fingers mate. What temperature were you running at?

Also note you have some with a nickel flash and others without a nickel flash.

How did you precipitate and how did you check that your liquor was barren?

Jon
 

Latest posts

Back
Top