help me
- Thread starter elesnawy
- Start date
Help Support Gold Refining Forum:
glorycloud
Well-known member
OK, I will refrain from smart a** remarks. 8)
Try searching on this forum for the word "ceramic". Try
searching ebay for the words "scrap processor" or "scrap CPU"
to see pictures of processors. You can also look on this website
that one of the forum members recommended:
http://www.thriftybits.com/
Everybody wants to know what the best CPU's are for gold.
Do some research here and you will find most everything that
you might want to know about best methods for their processing,
refining and even resale. Good luck!
Try searching on this forum for the word "ceramic". Try
searching ebay for the words "scrap processor" or "scrap CPU"
to see pictures of processors. You can also look on this website
that one of the forum members recommended:
http://www.thriftybits.com/
Everybody wants to know what the best CPU's are for gold.
Do some research here and you will find most everything that
you might want to know about best methods for their processing,
refining and even resale. Good luck!
Barren Realms 007
In Remembrance
At least you didn't give the secret out about the fiber cpu's. SHHHHHHHHHHH!!! 8)
leavemealone
Well-known member
For the love of god barren....SHUT IT!!
We can't just give out the golden info like that man....
As of right now I have about 4 of those really old 933mhz P3's and Im hoping for at least a 2 1/4 ounce yield.Man these things are just dripping with gold.....ROFL! This is just too easy.
Johnny
BTW,Thanks again for the B-day wishes guys,by that night,things started looking much better,and as of right now the problem has vanished....lets hope it stays that way.
We can't just give out the golden info like that man....
As of right now I have about 4 of those really old 933mhz P3's and Im hoping for at least a 2 1/4 ounce yield.Man these things are just dripping with gold.....ROFL! This is just too easy.
Johnny
BTW,Thanks again for the B-day wishes guys,by that night,things started looking much better,and as of right now the problem has vanished....lets hope it stays that way.
leavemealone
Well-known member
elesnawy,I know you are knew here,so I want to make sure you know I am just messing around with barren.He and I go back a ways,and we love to mess with each other on here,so its all in fun.
It will take you some time before you get used to what is what.The most honest way is to process the material yourself and keep track of your expenses and yields.If done correctly you will have the most accurate log you can have.
Johnny
I have looked at thrify bits' prices for years......some of the prices are well below what other refiners would pay for the same product,however some of the prices are close to what the actual PM (precious metal) content value is.
It will take you some time before you get used to what is what.The most honest way is to process the material yourself and keep track of your expenses and yields.If done correctly you will have the most accurate log you can have.
Johnny
jimdoc
Well-known member
Elesnawy,
That site is mainly for reference to give you an idea of prices.
As far as I know the guy who runs the site only deals in the local area.
(Northeastern US)
International shipping would make things way too expensive.
You should look for local places to deal with.
Jim
That site is mainly for reference to give you an idea of prices.
As far as I know the guy who runs the site only deals in the local area.
(Northeastern US)
International shipping would make things way too expensive.
You should look for local places to deal with.
Jim
Elsenawy this seems a good opportunity for you if no one else does this in Egypt.I know several people who buy container loads of e scrap from all over the world,if you can access quantities then shipping might be the answer but if its small amounts i suggest you recover the gold yourself the information to do so is right here on the forum.
