A aigpmr New member Joined Jun 16, 2012 Messages 2 Jun 16, 2012 #1 How do I use vacuum tubes to obtain a gold Pin sample?
L Lou Moderator Staff member Moderator Joined Nov 4, 2007 Messages 5,239 Location Rhodia Drive Jun 16, 2012 #2 With the appropriate tongs, quickly submerge the bulb end into the melt and pull it out rapidly.
A aigpmr New member Joined Jun 16, 2012 Messages 2 Jun 16, 2012 #3 I put it in but for some reason the bulb doesn't break. It should break correct?
L Lou Moderator Staff member Moderator Joined Nov 4, 2007 Messages 5,239 Location Rhodia Drive Jun 16, 2012 #4 Yes, if they are made right it will break upon entering the melt.
goldsilverpro In Remembrance Moderator Emeritus Joined Mar 30, 2007 Messages 7,961 Location Benton, Arkansas Jun 16, 2012 #5 What temperature is the melt?
W Westerngs Well-known member Joined Dec 9, 2011 Messages 279 Jun 16, 2012 #6 It sometimes takes a couple of seconds for the bulb to break, are you leaving the tube in long enough?
It sometimes takes a couple of seconds for the bulb to break, are you leaving the tube in long enough?
L Lou Moderator Staff member Moderator Joined Nov 4, 2007 Messages 5,239 Location Rhodia Drive Jun 16, 2012 #7 I've never had one take longer than a second--usually it is instantaneous.
G grainsofgold Well-known member Supporting Member Joined May 28, 2007 Messages 218 Location USA Jul 5, 2012 #8 Source for Pin Tubes Leco.com 3000 Lake View Ave. St. Jseph, MI 49085 800-292-6141 They sell standard, Precision and high Vacuum pin tubes and a pin tube holder.
Source for Pin Tubes Leco.com 3000 Lake View Ave. St. Jseph, MI 49085 800-292-6141 They sell standard, Precision and high Vacuum pin tubes and a pin tube holder.
P Pintube New member Joined Sep 11, 2012 Messages 3 Jul 9, 2013 #9 Get your pintubes from Burtec, they have invented them and have been making them since 1956. pintubes.com
Get your pintubes from Burtec, they have invented them and have been making them since 1956. pintubes.com