• Please join our new sister site dedicated to discussion of gold, silver, platinum, copper and palladium bar, coin, jewelry collecting/investing/storing/selling/buying. It would be greatly appreciated if you joined and help add a few new topics for new people to engage in.

    Bullion.Forum

Introduction

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MCB0513

New member
Joined
Feb 3, 2025
Messages
1
Location
South Carolina
Hey y'all i appreciate you all letting me join the group! I am new to all of this I had a hunting accident back in October and lost a toe so I have been out of work since. I couldn't be lazy and just sit in the house as the doctor wanted me to do I went searching! I have been looking since then and now I have found a what appears to be gem mind and some gold of course. Recently I have found a quart's vein and have so many questions but I'm kinda figuring them out as I go. I bought a vevor smelter and I am using it to start with. I am trying to make 3.5 oz bars. Any good flux recommendations? Thanks again for having me!
 

Attachments

  • b8bf33fb-9827-4433-8dbe-e2512d75b046.jpg
    b8bf33fb-9827-4433-8dbe-e2512d75b046.jpg
    2.3 MB
  • f35162ff-012b-41a5-bd3a-3ac58b48958e.jpg
    f35162ff-012b-41a5-bd3a-3ac58b48958e.jpg
    2.2 MB
  • a629b4e1-93c3-4b0e-872a-e387a108a99d.jpg
    a629b4e1-93c3-4b0e-872a-e387a108a99d.jpg
    1.7 MB
  • 5f0b7d8e-eaa8-4ce9-a470-89b9c7d430e1.jpg
    5f0b7d8e-eaa8-4ce9-a470-89b9c7d430e1.jpg
    2.7 MB
  • 44fdf27b-4205-4067-b88f-5e1c4a02ed80.jpg
    44fdf27b-4205-4067-b88f-5e1c4a02ed80.jpg
    2.7 MB
  • IMG_20250121_180509268_AE.jpg
    IMG_20250121_180509268_AE.jpg
    7.8 MB
  • d6109b34-ce42-477f-a40a-7eac18e35e3a.jpg
    d6109b34-ce42-477f-a40a-7eac18e35e3a.jpg
    1.9 MB
  • IMG_20250109_165948028_HDR.jpg
    IMG_20250109_165948028_HDR.jpg
    1.7 MB
  • a45e02be-da73-47b0-bba8-9cf6ca801e0f.jpg
    a45e02be-da73-47b0-bba8-9cf6ca801e0f.jpg
    2.5 MB
  • IMG_20250130_194352675_HDR.jpg
    IMG_20250130_194352675_HDR.jpg
    1.4 MB
  • 001578ce-1625-488c-94b6-61712e0525e7.jpg
    001578ce-1625-488c-94b6-61712e0525e7.jpg
    2.2 MB
  • IMG_20250109_154553391_HDR.jpg
    IMG_20250109_154553391_HDR.jpg
    1.3 MB
  • 1e8b88bc-74cf-4b68-ab5c-57884bf25326.jpg
    1e8b88bc-74cf-4b68-ab5c-57884bf25326.jpg
    2.7 MB
  • 23f6ef79-baaa-4348-b575-777c548f13be.jpg
    23f6ef79-baaa-4348-b575-777c548f13be.jpg
    2.2 MB
  • CM250203-021327001.jpg
    CM250203-021327001.jpg
    1.7 MB
  • CM250106-094824001.jpg
    CM250106-094824001.jpg
    1.3 MB
  • IMG_20250202_185310871_AE.jpg
    IMG_20250202_185310871_AE.jpg
    10.3 MB
Hey y'all i appreciate you all letting me join the group! I am new to all of this I had a hunting accident back in October and lost a toe so I have been out of work since. I couldn't be lazy and just sit in the house as the doctor wanted me to do I went searching! I have been looking since then and now I have found a what appears to be gem mind and some gold of course. Recently I have found a quart's vein and have so many questions but I'm kinda figuring them out as I go. I bought a vevor smelter and I am using it to start with. I am trying to make 3.5 oz bars. Any good flux recommendations? Thanks again for having me!
Welcome.
Until you have an assay it is just rocks.
In order to decide on flux one need to know what is in the rocks.
 

Latest posts

Back
Top