Is it worth it to save
- Thread starter hosef
- Start date
Help Support Gold Refining Forum:
tamerakshar
Well-known member
yes, the top one has 6 grams per kilo only in the black polymer.
hosef
Active member
I took a couple of the ones with the green bases and found that I can peel the green base off of the black part. After doing that I found that the green base has gold colored foils that I can peel off pretty easily with a chisel. Plus, there were some that had a metal disc on top of the black part.
Attachments
hosef
Active member
I take my chisel with with the flat side down and put the tip between the green base and the board. Then I tap the chisel lightly with my hammer until it separated from the motherboard.
meng2k7
Well-known member
whitesid said:
you can use a hot air desoldering machines, or if you are in the large number of boards, u can use a low temp torch to make it quick.
meng.
tamerakshar
Well-known member
meng,
are you left-handed, or you downloaded the pic from internet :idea:
are you left-handed, or you downloaded the pic from internet :idea:
