-
Please join our new sister site dedicated to discussion of gold, silver, platinum, copper and palladium bar, coin, jewelry collecting/investing/storing/selling/buying. It would be greatly appreciated if you joined and help add a few new topics for new people to engage in.
Bullion.Forum
microswitch
- Thread starter anarxi
- Start date
Help Support Gold Refining Forum:
I have a small bucket of them...... they are low grade. I don't feel they are worthy of the time yet. If I run out of better material, then maybe.
anarxi
Well-known member
- Joined
- Oct 30, 2019
- Messages
- 428
0,24 gramm
silver-palladium alloy 80/20.
The middle contact (normally open) is just a solid piece.
everything is silvered on top.
The thickness of the silver plating is visible after the burner.
people knew how to do 50 years ago.
silver-palladium alloy 80/20.
The middle contact (normally open) is just a solid piece.
everything is silvered on top.
The thickness of the silver plating is visible after the burner.
people knew how to do 50 years ago.
Attachments
Whenever I see a component which is the "wrong" color, I dig a little deeper. Microrelays, for example, are a pain to scrap, but when I do, it seemed like all the orange ones had gold plated silver alloy. And it's neat to have a soft fluffy ball of copper wire from the coil!
Those may be "signal" relays, which jogged my memory, I have 2000+ of these and arthritis in both my thumbs.
Gold-clad silver says the datasheet.
Gold-clad silver says the datasheet.
