My first little Au button :) -- Thanks everyone!

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TheArchitect

Member
Joined
May 8, 2008
Messages
21
Location
Tampa Florida
2.6 grams from about 600 gr of trimmed fingers. theres still a little precipitated powder in the SMB drop jar, so i'll save it to mix w/ the next batch of AuCl3.

[img:1533:977]http://usera.imagecave.com/mitchwfsu/firstAubutton2.6g.jpeg[/img]
 
TheArchitect said:
2.6 grams from about 600 gr of trimmed fingers. theres still a little precipitated powder in the SMB drop jar, so i'll save it to mix w/ the next batch of AuCl3.

[img:1533:977]http://usera.imagecave.com/mitchwfsu/firstAubutton2.6g.jpeg[/img]

It will help precipitate the next batch. Save that very fine Gold that takes forever to precipitate and mix a little in your next batch as you add the SMB. It will act as nucleation sites for the Gold to precipitate.
 
It will help precipitate the next batch. Save that very fine Gold that takes forever to precipitate and mix a little in your next batch as you add the SMB. It will act as nucleation sites for the Gold to precipitate.

Sounds like another one of those theoretical things that sound good but have no real practical application. I know it works in the formation of crystals but, when dropping gold, it sounds like a big waste of effort. Have you ever proven this to work, Irons, in this exact application?
 
luck of the flame... supposed to mount it in a pendant for my wife... been too busy w/ futures... will get around to it though...

first bit of self refined gold... will keep it forever and remember the great knowledge shared by the members of this board...

-TA.
 
What was the source of the fingers? Where they mixed or of on type. A while ago I ran 5 pounds of mixed fingers and yielded about 1.25 grams per pound.
 
Back
Top