need gold refiner near Ridgecrest, California

[paulverizer]

Below is the assay report of 4 different sites.
This test was done by a company on the east coast. Haber, inc.

The company recommends that I evaluate 60 lbs of each material. However,
they are on the east coast.

Extraction and recovery results. Micro Wave Digest with Aqua Regia
Using laboratory testing not using the Aladdin Methodology
Unoptimized results 100 gram samples of each ore was treated.

Sulfide Extraction Recovery
Sample Assay Tailing Recovery reduction cycle cycle Initial Au

Sample AU oz/ton AU oz/ton % Au extracted Hours Hours Hours purity
% Formulation

1 3.067 0.150 95% 0.35 1.2 0.25 98 Process hp7 modified

2 3.947 0.200 95% 0.3 1.1 0.25 99 Process hp7 modified

3 36.433 1.450 96% 0.45 1.3 0.4 98 Process hp9 modified

4 2.507 0.100 96% 0.3 1.2 0.3 98.5 Process hp7 modified
Would like some advice on further in the assessment of these materials.
And secondly, locating a facility where I could run 2 tons/hr or a similar
production rate.

The mines are near Ridgecrest, California.
Thank you,
Paul 310-279-9944

 

[Richard36]

Hello paulverizer,

Simplify your post and tell me how much gold per ton of ore that the assay revealed,
and I'll see what I can do as far as helping you find a market for your ore.

Sincerely, Rick. "The Rock Man".

 

[paulverizer]

Hi there!
I think I might have made my message confusing...
basically I have done some testing on a couple of mines and have some good results.

Would like some advice on further in the assessment of these materials.
And secondly, locating a facility where I could run 2 tons/hr or a similar
production rate.

The mines are near Ridgecrest, California.

I would love some help in knowing what to do next.

Thanks!
Paul

 

[Harold_V]

Hi there!
I think I might have made my message confusing...
basically I have done some testing on a couple of mines and have some good results.

The problem is, you can't sell "good results". What you can sell is the assay of the ore. If you'd like help, you must be forthcoming of your results, talking about your findings in ounces per ton. That's what is needed in order to make viable decisions. Doesn't matter if you can get 100% extraction if there's just a trace of gold and or silver present.

How much?

Harold

 

[paulverizer]

Hi! thanks for asking!
I tried to put all that in the initial message and the pagination made it confusing!

here's the results:
sample 1: 3.067 AU oz/ton
sample 2: 3.947 AU oz/ton
sample 3: 36.433 AU oz/ton
sample 4: 2.507 AU oz/ton

The other numbers I posted were:
Tailing AU oz/ton
% Au extracted Recovery
# of Sulfide reduction Hours
# of Recovery cycle Hours
Initial Au purity %

I'm at 310-279-9944 if you want to ask me more details!
Thanks again for being so kind to ask!
Sorry my post wasn't clear the first time.
It was the first time I posted in a Forum!
you guys are great!

 

[Richard36]

Hi! thanks for asking!
I tried to put all that in the initial message and the pagination made it confusing!

here's the results:
sample 1: 3.067 AU oz/ton
sample 2: 3.947 AU oz/ton
sample 3: 36.433 AU oz/ton
sample 4: 2.507 AU oz/ton

The other numbers I posted were:
Tailing AU oz/ton
% Au extracted Recovery
# of Sulfide reduction Hours
# of Recovery cycle Hours
Initial Au purity %

I'm at 310-279-9944 if you want to ask me more details!
Thanks again for being so kind to ask!
Sorry my post wasn't clear the first time.
It was the first time I posted in a Forum!
you guys are great!

Hello paulverizer,

Welcome to the forum.
How many tons or pounds of each sample listed do you have that is ready to ship?
I'll make some phone calls and send some e-mails with that info,
and see what I can do for you.

Thanks for the phone call yesterday.
I sent an e-mail with the spread sheet as an attachment to my contact in Quebec stating the amount & grade of ore that you have ready to ship.
so at this point, it's a waiting game for a reply.

I went through my list of contacts and found a few others that would probably be interested as well, but I would have a whole lot more success if I could tell them how many tons of each sample listed above that you have ready to ship.

Sincerely, Rick. "The Rock Man".