• Please join our new sister site dedicated to discussion of gold, silver, platinum, copper and palladium bar, coin, jewelry collecting/investing/storing/selling/buying. It would be greatly appreciated if you joined and help add a few new topics for new people to engage in.

    Bullion.Forum

Reply to thread

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Haha i like that^


I will be good to get some more brains in this venture..


My setup is like this atm:

Running 24 V   7 A power. I tryed 24v and 10A, but could'n se any differince.

My glas bowl is around 4 litres/~1,5gal i think.

Catode/anode is sitting aprox 5inc from itchothers- i tryed mohing both closer and longer distance, but could not see any chance.

I have now cleanet the silver of 1 spoon, and 2 suger cups at the size of a grown mans fist, and i think all in all it has run for 12-15h. It won't get the silver inside thise cups, so i'm saveing them, and then i will flatten out with a hammer. I should allso mention that i'm turning the cups as they get strippet, course it seems that they only get strippet on the side facing the catode-or maybe i just needs more patien and it will get there:)

I now have a bit more than 0,5inch gryish sediment on the botten, and the botten of my bowl is messuring 6-7inch in diameter.


Hope this all makes sense.


Back
Top