steyr223
Well-known member
Hello and how is everyone
Today will be a good day.
I have recently dropped a flattened 3/4" x 10"
Copper pipe in my stockpot
If there is any left i will brush all cemented Au back
Into pot ans let settle for 2 or 3 days before siphoning
The liquid and testing then will place some Fe in
My question has to do with my solids
This probaly is not the best way but i only have
One stockpot ,So it contains all the sulphates
And oxides from ceramic ic's and everything else
From many processes to include
Led ,kovar ,cobalt,nickel,silver,iron,copper and
Im sure many others and Au i hope
Once i have all of my solids together i will dissolution
With Hcl/bleach( this is ok or do i need to heat
With a nitre and Hcl)
Once dissolutioned do i need to follow the same
Process for ceramic ic's where i filter into
An ice bath with a pinch of sulfumic acid and let
Settle and then decant leaving again my sulpfates
And chlorates behind (of course washing till clear)
After i would filter with charmin plug and precipitate
With smb mixed with an equel amount of water
Of course i would be testing with stannous at every turn
Especially when switching vessels
Can anyone tell me what i might have left out
Or am doing wrong
I know i am not very good at this so i plan on a lot
Of Au
I had finally a couple months ago started a different
Stock pot for decanted solution after precipitation
And o my god
In a week my stock pot had more brown powders
In it than all the Au i had melted :lol:
And i thought i was being careful
Thanks steyr223 rob
Any and all comments good or bad are welcome
And greatly appreciated
Today will be a good day.
I have recently dropped a flattened 3/4" x 10"
Copper pipe in my stockpot
If there is any left i will brush all cemented Au back
Into pot ans let settle for 2 or 3 days before siphoning
The liquid and testing then will place some Fe in
My question has to do with my solids
This probaly is not the best way but i only have
One stockpot ,So it contains all the sulphates
And oxides from ceramic ic's and everything else
From many processes to include
Led ,kovar ,cobalt,nickel,silver,iron,copper and
Im sure many others and Au i hope
Once i have all of my solids together i will dissolution
With Hcl/bleach( this is ok or do i need to heat
With a nitre and Hcl)
Once dissolutioned do i need to follow the same
Process for ceramic ic's where i filter into
An ice bath with a pinch of sulfumic acid and let
Settle and then decant leaving again my sulpfates
And chlorates behind (of course washing till clear)
After i would filter with charmin plug and precipitate
With smb mixed with an equel amount of water
Of course i would be testing with stannous at every turn
Especially when switching vessels
Can anyone tell me what i might have left out
Or am doing wrong
I know i am not very good at this so i plan on a lot
Of Au
I had finally a couple months ago started a different
Stock pot for decanted solution after precipitation
And o my god
In a week my stock pot had more brown powders
In it than all the Au i had melted :lol:
And i thought i was being careful
Thanks steyr223 rob
Any and all comments good or bad are welcome
And greatly appreciated