frank-20011
Well-known member
- Joined
- Jul 18, 2015
- Messages
- 183
hello everyone,
often there are potts in the scrap which are made of stainless and sometimes they have handles which are plated with Au.
how thick is these kind of plating?
often it's gone, better it is rubbed of on the most touched spots.
http://i.ebayimg.com/00/s/MTE3NlgxNjAw/z/PrEAAOSwFe5X0tFX/$_57.JPG?set_id=880000500F
i think these platings in the most cases are thin.
but as thin as ENIG platings?
is there everyone who have worked with these kind of material?
best regards, Frank!
often there are potts in the scrap which are made of stainless and sometimes they have handles which are plated with Au.
how thick is these kind of plating?
often it's gone, better it is rubbed of on the most touched spots.
http://i.ebayimg.com/00/s/MTE3NlgxNjAw/z/PrEAAOSwFe5X0tFX/$_57.JPG?set_id=880000500F
i think these platings in the most cases are thin.
but as thin as ENIG platings?
is there everyone who have worked with these kind of material?
best regards, Frank!