Not sure if this is the right section for this question. I picked up a couple servers (Compaq ML350). They are locked and I don't have the key. Is there a good way to open these up? I'm not concerned about damaging the outside. I just want the internal components.
-
Please join our new sister site dedicated to discussion of gold, silver, platinum, copper and palladium bar, coin, jewelry collecting/investing/storing/selling/buying. It would be greatly appreciated if you joined and help add a few new topics for new people to engage in.
Bullion.Forum
Non-Chemical Unlocking Locked Servers
- Thread starter skyline27
- Start date
Help Support Gold Refining Forum:
The keys are pretty interchangeable among similar manufacturers. If you have a key to another Compuke server it may work.
I always leave a set of the keys tethered to the back of the server cabinet so they don't get lost.
Some folks don't even lock the locks.
If all else fails break or cut the lock off.
Steve
I always leave a set of the keys tethered to the back of the server cabinet so they don't get lost.
Some folks don't even lock the locks.
If all else fails break or cut the lock off.
Steve
lmills148
Well-known member
A uni-bit right through the tumbler. Or a really big hammer.
Lloyd
.
Lloyd
.
Gotrek
Well-known member
I'm an automotive hobbiest, sheet metal fabrication stuff like that. My favorite all around tool is my Sawzall (reciprocating saw) It would do sonder for cutting around that lock.
A bid dril works too or a large punch and hammer.
A bid dril works too or a large punch and hammer.
