calcultaion how much HN03 to (w) or (v) in pins

[steyr223]

calcultaion how much HN03 to (w) or (v) in pins
67% and i will dilute by volume 50/50 (H20)

 

[goldsilverpro]

calcultaion how much HN03 to (w) or (v) in pins
67% and i will dilute by volume 50/50 (H20)

It takes about 1 gallon of a mixture of 50% nitric (v) and 50% water (v) to dissolve 1 pound of copper or copper alloys. On a smaller scale, it takes about 8.3 ml of the same 50/50 nitric to dissolve 1 gram of copper or copper alloys.

You haven't been doing much searching and studying, have you? I've posted this information at least 25-50 times. In fact, I posted it earlier today on another thread. Please don't take offense at this. I'm used to repeating myself over and over, but that doesn't mean I like it.

When dealing with concentrated acids, we generally don't deal with % by weight on the forum. It is much easier to measure % by volume and it's easier to understand.

 

[Sucho]

i agree with GSP. you can count 1 :4 w / w

 

[steyr223]

thank u

if u look at my post i asked just to b pointed

re edited by me
i am sorry that is falseI asked to b pointed on another thread

i have seen this subject at least 12 -15 times in past
36 hrs
and as i consider my self a master @ advanced expression searching
and programming

I am emberassd that i couldn't find the right string in your searcher

but i am now an expert at A/R mixtures 10 or more threads
nitric acit what % , 67 0r 70 20 or more threads
nitric or A/P a whole lot of threads
even nitric after A/R that one took a while
and many more but not this one
i even posted 3 or so comments on diff threads

i just couldn't find it so thank u very much

i would have sworn i saw a thread that said just cover the pins up
that people always waste nitric

any ways

i agree with GSP. you can count 1 :4 w / w

if u are refering to weght 1lb to 4 lb wouldn't it be
1lb of pins:1 gallon of solution =
1 lb of pins:7 or 8 lb of solution =
1:8
just out of curiosity

thx