Cannot precipitate gold from HCL and bleach

[Ckbouda]

Peroxide will do nothing. Not even strong 30% will do much alone.

So i can put it inside to oxidize the basic metals and after its reduced burn the rest to metal again slightly reduced?will this help a little?

 

[galenrog]

Wise.im learning and im practicing it doesn't matter the outcome its the procedure

The procedure determines the outcome.

Read Hoke. Read it again. On the third time through, write notes and questions. Bring questions here. Pay especially close attention to notes and edits made by Dave (FrugalRefiner).

Perform the acquaintance experiments she presents. Each in sequence shown. Several times, if necessary, to achieve repeatable results.

Do this, and you will have a rudimentary understanding of both recovery and refining.

Still time for more coffee.

 

[Yggdrasil]

So i can put it inside to oxidize the basic metals and after its reduced burn the rest to metal again slightly reduced?will this help a little?

You need to study more.
As I said even 30% Peroxide will not do anything.
So I suggest you start reading up on smelting and fluxes.
Maybe even bubbling air through the smelt.
This wiil surely remove most of the base metals.
Next depending on the amount of metals remaining you can scorify it with Lead and cupel it after.

 

[Martijn]

Since i got so much waste metals inside...do i need to put also lead in the beginning?or the waste metal inside is good to start with?

I would look into a copper sulfate aka copper refining cell. Leaving the values in the anode bag, you can refine that a lot easier.