T Traveller11 Well-known member Joined Dec 24, 2007 Messages 281 Location Sandspit, Queen Charlotte Islands, BC, Canada Oct 1, 2012 #1 Although this topic has been discussed before, I would like to see if anyone has any new insights into this process.
Although this topic has been discussed before, I would like to see if anyone has any new insights into this process.
etack Well-known member Joined Nov 8, 2008 Messages 1,404 Location Dayton, Ohio Oct 1, 2012 #2 If what you are stripping is free of Cu it's a waste of time. The Cu will go into solution along with the gold. It also takes forever. Eric
If what you are stripping is free of Cu it's a waste of time. The Cu will go into solution along with the gold. It also takes forever. Eric
T Traveller11 Well-known member Joined Dec 24, 2007 Messages 281 Location Sandspit, Queen Charlotte Islands, BC, Canada Oct 1, 2012 #3 There is no copper in what I am dealing with, just a large percentage of magnetite. I understood that this leach was selective for gold as long as the ph did not go too high.
There is no copper in what I am dealing with, just a large percentage of magnetite. I understood that this leach was selective for gold as long as the ph did not go too high.
etack Well-known member Joined Nov 8, 2008 Messages 1,404 Location Dayton, Ohio Oct 1, 2012 #4 The only test I've done has been on E-scrap. as an ore thats out of my realm other on here will be able to help. Good luck Eric
The only test I've done has been on E-scrap. as an ore thats out of my realm other on here will be able to help. Good luck Eric