Greetings and Salutations

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dr. Munkii Ugz

New member
Joined
Jun 7, 2024
Messages
1
It is I Munkii.......
New to this and just here to learn.....
I couldnt remember what
SreeTips was using StumpOut for and did a search and this forum popped up...... I have yet to do anything but buy beakers, acids, and i have lots and lots of old computer parts and what not..... All piling up from years and years of saving ..... I dont think i have enough to start just yet but i do have alot...... I am going to make a hood and vent system out in the shed before doing any of that chemical work...... But i hope to be able to get the most out of what i have from my research....... SreeTips on youtube has taught me much but i also know that unless i do it myself i will never get it right but the mistakes others made and the correct procedures that i do will all be because of you and everyone else that helps me along the way...... Thank you i will prolly not get back on here til im good and ready..... Plus i have too many projects and not enough money to start this up yet......
 
It is I Munkii.......
New to this and just here to learn.....
I couldnt remember what
SreeTips was using StumpOut for and did a search and this forum popped up...... I have yet to do anything but buy beakers, acids, and i have lots and lots of old computer parts and what not..... All piling up from years and years of saving ..... I dont think i have enough to start just yet but i do have alot...... I am going to make a hood and vent system out in the shed before doing any of that chemical work...... But i hope to be able to get the most out of what i have from my research....... SreeTips on youtube has taught me much but i also know that unless i do it myself i will never get it right but the mistakes others made and the correct procedures that i do will all be because of you and everyone else that helps me along the way...... Thank you i will prolly not get back on here til im good and ready..... Plus i have too many projects and not enough money to start this up yet......
Welcome.
Here is some reading for you.
Start with Safety and dealing with waste.
Hokes book gives an easy introduction to the most basic Chemistry we use.

We ask our new members to do 3 things.
1. Read C.M. Hokes book on refining jewelers scrap, it gives an easy introduction to the most important chemistry regarding refining.
It is free here on the forum: https://goldrefiningforum.com/phpBB3/viewtopic.php?f=54&t=19798
2. Then read the safety section of the forum: https://goldrefiningforum.com/forums/safety.47/
3. And then read about "Dealing with waste" in the forum: https://goldrefiningforum.com/threads/dealing-with-waste.10539/

Suggested reading:
https://goldrefiningforum.com/forums/the-library.101/
https://goldrefiningforum.com/threads/when-in-doubt-cement-it-out.30236/
https://goldrefiningforum.com/threa...le-read-this-before-you-post-about-ore.33333/


Forum rules is here.
https://goldrefiningforum.com/threads/gold-refining-forum-rules.31182/
 
Back
Top