We have close to 250lbs of this material that we got out of a warehouse clean out. The other material that was with it was dated mid-late 70's. From the looks of it, the material seems to be pretty nice. But I wanted to see if anyone knows how good it may be. I have cleaned 5 lbs and got 1.5lbs of cleaned material. Thanks in advance for the advice.
Has anyone ever run this type of material.
- Thread starter escrap
- Start date
Help Support Gold Refining Forum:
drtyTshrt
Well-known member
:?: Looks like brass to me.
etack
Well-known member
what are the dimensions? they look to be about 0.30USD apiece in gold.
1 sq inch @ 30 micro inches is 0.54USD today with gold @1762.00USD
http://goldnscrap.com/index.php?option=com_content&view=article&id=72:gold-plating-calculator&catid=49:calculators&Itemid=66
if you take them off the white part leave the wires on you might be able to run the real easy in a cell by conesting the wires at the end.
Eric
1 sq inch @ 30 micro inches is 0.54USD today with gold @1762.00USD
http://goldnscrap.com/index.php?option=com_content&view=article&id=72:gold-plating-calculator&catid=49:calculators&Itemid=66
if you take them off the white part leave the wires on you might be able to run the real easy in a cell by conesting the wires at the end.
Eric
Geo
Well-known member
ive ran many of them. they do yield high, well more than computer pins. on average about .4g per US pound maybe a little better.
this was almost two years ago and my memory may be faulty.after thinking about it, i may have gotten things backwards, instead of 2.5 pounds per gram, it may have been 2.5g per pound. if it is, im sorry to have mislead anyone.
this was almost two years ago and my memory may be faulty.after thinking about it, i may have gotten things backwards, instead of 2.5 pounds per gram, it may have been 2.5g per pound. if it is, im sorry to have mislead anyone.
