I am new to this

[scraprat35]

I am new to refining gold from circuit boards. Need to know how to get a hold of the chemicals, which is best or not, how to clean after extracting, and how to melt down to nugget or brick.

 

[goldsilverpro]

You have lots of searching and reading to do. Everything you want to know has been written many times on the forum.

 

[resabed01]

I am new to refining gold from circuit boards. Need to know how to get a hold of the chemicals, which is best or not, how to clean after extracting, and how to melt down to nugget or brick.

Welcome Scraprat.

Ask yourself this....

If you're here to learn about harvesting PM bearing scrap, processing, refining, doing it in a safe manner and properly disposing of wastes when done, then you are in the right forum.

If you're here just because you want to turn circuit boards into gold bricks, this place probably isn't for you.

Think of it this way... you've arrived and you're standing in the middle of a vast forest, a forest of information. What you need to do now is open your eyes and look around.

Enjoy your stay.