Making Auric Chloride at Home: Questions and Comments

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Dude4ever said:
How do you know that chlorine is out of solution and that it is safe to drop with SMB?

chlorine will evaporate from solution at room temperature on its own with no further action needed than to be left alone.depending on how much bleach you added to the solution 12-24 hours is all thats needed. you can stir the solution before adding water, if the solution bubbles or fizzes, it still has free chlorine. if you shake the solution till all the bubbles rise to the top and no more bubbles form in a few minutes then the chlorine is evaporated.
 
Hi
If I want dissolve some gold powders or gold foiles with hcl/cl method but without heating solution
How much time I must wait between adding shots
(I know with heating we must wait 1 to 5 minutes and then add another shot of chlorex)
Thanks
 
I never heat, I use a strong bottle (usually a cleaned simply orange bottle) add the gold & HCl, then I put in the chlorine and close it tight. Shake it up and let it sit. Every once and awhile shake it real good to mix it around. Not in a rush so I let it take its time.
Just don't put too much to exceed the pressure of the bottle. Never had an issue and reduces the amount needed.
 
goldscraphobby said:
I never heat, I use a strong bottle (usually a cleaned simply orange bottle) add the gold & HCl, then I put in the chlorine and close it tight. Shake it up and let it sit. Every once and awhile shake it real good to mix it around. Not in a rush so I let it take its time.
Just don't put too much to exceed the pressure of the bottle. Never had an issue and reduces the amount needed.

Thank you
How much time do you wait usually then add another shot of chlorex?
 
It depends on how patient you are and how much gold. Sometimes I just add once and keep shaking it over a fews days. till its all disolved or its used up. If its doesn't seem to react Then add a little more.
 
anachronism said:
saadat68 said:
Hi
If I want dissolve some gold powders or gold foiles with hcl/cl method but without heating solution
How much time I must wait between adding shots
(I know with heating we must wait 1 to 5 minutes and then add another shot of chlorex)
Thanks

The simple answer is "until it not doing anything."

Thanks
How long does it take usually for gold foils and gold powders? One or two days?
 

Latest posts

Back
Top