Need help for this gold plated

[richard2013]

Hello to All!

This is my first post, I being reading for like 7months to learn and start to process when I have the right safe area.
I am collecting items please give me estimated yield for this telecom board with aluminum fully plated with gold at the back of also gold plated PCB.

 

[necromancer]

heat up the board to remove it

if those are Aluminium slabs they will not react to nitric

clean off the glue, scratch up the cold plating & put them in a nitric bath

it will flake off in nice sheets

 

[Harold_V]

I see that you have posted the same topic elsewhere on the board.

Be advised that we DO NOT PERMIT multiple posts, so the other one has been deleted.

When you wish to post, pick the proper sub-forum and post the topic ONLY ONCE. Most of our readers see everything that is posted, regardless of the location.

Harold

 

[richard2013]

Actual sir I have deleted my other post myself and apologize for the mistake. I tought it was a general thread for help on yields and when I double check I saw it it belongs to patnor. So I made sorry and remove that post and made one for me. I hope anyone can let that mistake go.

 

[patnor1011]

Dont worry, no thread belong to me and you can post in any of them.