Questions on flux

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

yvonbug

Well-known member
Joined
Oct 20, 2007
Messages
174
Location
Mtn. Ranch, CA. USA
Soda ash tears up the crucible, but thins out borax a bit.
Borax, even a little bit, gets thick and gooey, then hard as glass. Plus, if it stays on the gold button, it's a b**** to get off.
Are there any other kinds of flux that are thinner, and don't eat the crucible, easier to clean off, etc., etc.?
 
A little fluorspar along with very little soda ash will thin out the borax flux considerably.
 

Latest posts

Back
Top